Photofinish OPTIc2n
Technical Data
Camera OPTIc2n
| Sensor: | 3 x 1360 pixel (RGB) |
| Pixel Resolution: | max.1360 pixel per lane |
| Number of Colors: | 16.7 million colors, or black/white |
| Scan Rate: | 100 to 3000 lines per second |
| Recording Time: | unlimited; depends on PC harddisk |
| Objective: | C-Mount
lens adapter Option: Nikon lens adapter |
| Quartz Frequency: | TCXO 20.000 MHz (temperature compensated quartz oscillator) |
| Measuring Range: | 23 hours, 59 min., 59.999 sec. |
| Frequency Deviation: | Temperature:
+/- 2.5 ppm at -10 to +70°C (+/- 0.009 seconds per hour) Ageing: +/- 1 ppm per year Frequency Adjustment : +/- 0.1 ppm at 25°C |
| Connections: | 2
x start input (banana socket) |
| Power Supply: | +9 to 36 VDC |
| Temperature Range: | 0 to 50°C (32 to 122 F) |
1 |
1 x RJ45 cable (min. CAT5 cross cable) |
|
|
2 |
2 x IEEE 1394b 6-pol bilingual | |
|
3 |
1 x GOF (LC duplex glass optical fiber connector) | |
|
4 |
1 x motor zoom | |
|
5 |
2 x finish input (DIN-socket) | |
|
6 |
Fuse T1.6 A | |
|
7 |
1 x power supply (9 to 36 VDC) | |
|
8 |
1 x LED for OK-status (operation) | |
|
9 |
1 x display board (banana socket) | |
|
10 |
1 x finish input (banana socket) | |
|
11 |
2 x start input (banana socket) | |
|
12 |
spirit level | |
|
13 |
sight to aim the camera with the finish line |
Requirements for IEEE 1394
interface for PC:
| Compatibility: | IEEE 1394A or 1394B OHCI compatible |
| Transfer Rate: | min. 400 MBit per second |
Requirements for PC (Desktop or Notebook):
| Processor: | Intel Pentium Dual Core (similar or better) |
| Hard Disk: | min. 60 GB hard disk (as faster as better) |
| Memory: | min. 1 GB RAM |
| Graphic: | min. 32 MB Graphic RAM |
| Monitor Resolution: | 1024 x 800, best with 1600 x 1200 or 1920 x 1200 |
| Interface: | IEEE 1394A or 1394B OHCI compatible Interface |
