Printer P5
The P5 is a quiet and fast Thermo-Paper-Printer (up to 5 lines per second). The construction makes a easy paper change possible. The transport axle is combined with the paper cover and guaranties, that the paper can be changed without arranging the paper complicated.
The printer head does not move since it is arranged over the complete line. Because of this construction a blocking of the paper between the axle and the printer head is almost impossible.
Types of the Printer P5:
ALGE offers three different types of the Printer P5. The difference between the types is in the connection plugs. The technical details are for all types 100% identical.
| Type | Plug | Device |
| Printer P5-5 | DIN-cube-plug | Timer S4, OPTIc, SWIM 2000 |
| Printer P5-8 | DIN-8-pin | Comet |
| Printer P5-25 | D-Sub 25-pin | Timy-S and Timy XE |
Where do you use the Printer P5:
The Printer P5 is made a reliable protocol printer for Timing. The big advantage over other printers is that it works without heating from –20° up to 55°C.
Of course the Printer P5 can also be used for other occasions where you need a reliable printer with RS 232 interface.
Technical Data:
| Principal of Printer: | Graphic Thermo Printer |
| Paper: | Thermo paper, 57 mm (2.24 in) wide, diameter 49 mm (1,97 in), length of a roll about 25 m (75 feet) |
| Printer Speed: | Up to 5 lines per second |
| Interface: | RS 232 |
| Baud Rate: | 2400 Baud |
| Protocol: | ASCII, 1 start bit, no parity bit, 8 data bit, 1 stop bit |
| Operation Elements: | key for paper feed |
| Connection Sockets: | power supply (5 to 15 VDC) |
| Connection Plugs: | depending on type, cable length about 1 m / 39 in |
| External Supply: | from timer or external (5 to 15 VDC) |
| Working Temperature Range:: | -20 to 55°C / -4 to 131 F |
| Measurements: | about 157 x 94 x 64 mm / 6.18 x 3.7 x 2,52 in |
| Weight: | about 350 g / 0,8 lb (without paper) |
