Sender-Transmitter Photocell RLS1nd

Sender-Transmitter Photocell RLS1nd

The ALGE photocell RLS1nd is usable for distances between Transmitter and Receiver from 0 to 150 Meters.

Principal:

The transmitter TX of the photocell sends a modulated infrared beam. The RLS1nRX receiver controls the beam and makes an impulse for each interruption.

Sender RLS1n: Photocell Transmitter RLS1n:

The transmitter has a built in transmitter and receiver. Together with a reflector you can use it as a reflection photocell.

With the switch on the backside of the photocell you can turn the internal battery of the photocell on and off.

Photocell Receiver RLS1nRX:

The receiver has a built in transmitter and receiver. With the switch (race/adjust) on the backside of the receiver you can turn the transmitter on and off. You have to turn the transmitter on "adjust" to adjust the photocell. For the timing you have to switch the transmitter to the position "race".

Together with a reflector you can use it as a reflection photocell. Than you must adjust the swith on "adjust".

Standard Photocell RLS1nd Package:

Transmitter RLS1n:

meter to adjust the photocell and control the power supply

battery compartment

DIN-socket (impulse output and power supply)

Banana socket (impuls output)

on/off-switch for battery

sight to adjust the photocell

weather cover to protect the lens

socket joint to fasten the photocell

alkaline baby battery

Receiver RLS1nRX:

meter to adjust the photocell and control the power supply

battery compartment

DIN-socket (impulse output and power supply)

Banana socket (impuls output)

on/off-switch for battery

switch race / adjust

sight to adjust the photocell

weather cover to protect the lens

socket joint to fasten the photocell

alkaline baby battery

Fastening bracket for transmitter RLS1nd and receiver RLS1nRX

Photocell cable 001-10 (10 Meter stop cable)

Accessories:

Reflector to use the photocells as reflecting photcells

Alkaline battery, baby

NiCd rechargeable, baby

External battery cable 028-02 (7 to 30 V) with potential free contact

Tripod for photocell and reflector

Case with foam insert for photocell and accessories (TN 622)

Cable reel with 300 or 500 Meter 2-core fieldtelephoneline (KT300 or KT500)

Startcable 002-10 (standard 10 m, on request up to 100 m)

Intermediate time cable 003-10 (standard 10 m, on request up to 100 m)

Stop cable 001-10 (standard 10 m, on request up to 100 m)

Adapter 029: input for photocell, potential free normal open and normal closee contact, to use the photocell with devices not made by ALGE

Photocelladapter LA4 with built in speech amplifier (speech connection to timing operator), power supply, and photocell mode selection

Technical Data

Transmitter RLS1n:

Max. Distance:	0 to 150 m
Power Supply:	5 VDC / 25 mA max. or internal baby battery
Pin Connection:	1 = Signal output 2 = Signal output 3 = 0 Volt 4 = empty 5 = +5V stabilized
Switch:	battery on/off
Measurements:	160 x 135 x 58 mm
Weight:	0.6 kg (1.2 Pound)

Receiver RLS1nRX:

Max. Distance:	0 to 150 m
Power Supply:	+5 VDC / 25 mA max. or internal baby battery
Pin Connection:	1 = Signal output 2 = Signal output 3 = 0 Volt 4 = empty 5 = +5V stabilized
Output:	NPN transistor, open collector, active low
Reaction time:	300 µs, 2 ms adjusted
Impulse length:	20 to 1400 ms adjustable
Switch:	Switch 1: on or off Switch 2: race or adjust
Measurements:	160 x 135 x 58 mm
Weight:	0.6 kg (1.2 Pounds)

Power supply:

Transmitter RLS1n:
The transmitter is supplied by a internal battery. You can use a alkaline battery (throgh away), or NiCd (rechargable).

Receiver RLS1nRX:
The receiver is supplied from the timing device (stop cable 001) or by the internal battery. If the receiver works with the internal battery, you can use a 2-core cable (e.g. ALGE cable reel KT300 with 300 m fieldtelephoneline).

Working time of the RLS1nd supplied by the internal battery:

Transmitter RLS1n:

alkaline battery about 40 hours

NiCd rechargeable about 18 hours

Receiver RLS1nRX:

alkaline battery about 160 hours (transmitter off)

NiCd rechargeable battery about 72 hours (transmitter off)

The above given working hours are measured at 20°C. If you use the photocell at -20°C it will reduce the capacity of the alkaline battery up to 75 % and NiCd up to 25 %.

Photocell Leaflet